A dull knife makes holiday cooking slower, more frustrating and, surprisingly, less safe. Dull blades slip off onion skins and squash instead of biting in, which means you push harder and have less control.

The good news: sharpening your own kitchen knives is a skill anyone can learn in an afternoon. Here’s a beginner-friendly guide to get your knives ready before the big Thanksgiving prep day.

Honing vs. sharpening: what’s the difference?

These two words get mixed up all the time.

  • Honing straightens the edge of a blade that has bent or rolled slightly with use. It doesn’t remove much metal. You do it with a honing rod, the long steel rod that comes with many knife sets.
  • Sharpening grinds away a small amount of metal to create a fresh edge. You do it with a whetstone, an electric sharpener or a pull-through sharpener.

Most home cooks should hone often and sharpen only a few times a year.

The paper test

Not sure if your knife needs work? Hold a sheet of printer paper by one corner and slice down through it. A sharp knife cuts cleanly. A dull one tears, snags or folds the paper. You can also try slicing a tomato: a sharp knife glides through the skin without squishing it.

Option 1: Honing rod (quick touch-up)

  1. Hold the rod vertically with the tip resting on a cutting board or folded towel.
  2. Place the heel of the knife against the top of the rod at about a 15 to 20 degree angle.
  3. Pull the knife down and toward you, sweeping from heel to tip in one smooth motion.
  4. Repeat on the other side. Do 5 to 8 strokes per side, alternating.

Go slowly. Light pressure and a steady angle matter more than speed.

Option 2: Pull-through sharpener (easiest)

Pull-through sharpeners have preset slots that hold the angle for you, which makes them great for beginners.

  1. Place the sharpener on a flat, stable surface.
  2. Draw the knife through the coarse slot, heel to tip, with light pressure, several times.
  3. Repeat in the fine slot to polish the edge.
  4. Wipe the blade clean.

They’re fast and simple, though they remove more metal than a whetstone, so avoid overusing them on knives you love.

Option 3: Whetstone (best results)

A whetstone takes practice but gives the sharpest, most controlled edge.

  1. Prep the stone. Some stones need soaking in water for 10 to 15 minutes; others just need a splash. Follow the instructions for yours.
  2. Set it on a damp towel so it won’t slide.
  3. Start with the coarse side. Hold the knife at about 15 to 20 degrees and push it across the stone, edge first, sweeping so the whole edge from heel to tip makes contact.
  4. Work one side until you feel a burr, a tiny lip of metal on the opposite side. Then switch sides.
  5. Move to the fine side and repeat with lighter strokes to polish the edge.
  6. Rinse and dry the knife and stone.

Tip: color the edge with a marker before you start. If the ink wears off evenly, your angle is right.

Safety first

  • Always move slowly and keep fingers behind the edge.
  • Work on a stable surface with good lighting.
  • Never test sharpness by running a finger along the blade.
  • Keep kids and pets out of the area.
  • Serrated bread knives need special tools, so skip them or have them professionally sharpened.

Keep knives sharp longer

  • Hone before each big cooking session.
  • Use wood or plastic cutting boards, never glass or stone.
  • Hand-wash and dry knives instead of using the dishwasher.
  • Store them in a block, on a magnetic strip or with blade guards, not loose in a drawer.

The wrap-up

Fifteen minutes with a honing rod or sharpener can make your Thanksgiving prep faster and safer. Start with an inexpensive knife to practice, keep the angle steady and take your time. By the time the turkey’s ready to carve, you’ll be glad you did.

Image: 13. Peeler and kitchen knife by Datariumrex via Wikimedia Commons, CC0 1.0